TPO Roofing Lansing, MI

TPO Roofing - Lansing, MI 1

TPO is one of the most common membranes on flat and low-slope commercial roofs, but its headline benefits do not tell a Lansing owner whether it suits a particular building. This guide explains what TPO is and how to assess it against the roof, the building and the contractor’s scope.

JM Roofing Solutions works with commercial owners in Michigan on single-ply roofing, including TPO, along with repairs and maintenance, acrylic coatings and restoration, spray foam roofing and commercial gutters. For questions about a specific building, call (833) 466-5325.

What is TPO Roofing?

TPO (thermoplastic polyolefin) is a single-ply membrane made from a blend of polypropylene and ethylene-propylene rubber. Sheets are joined by heat-welding at the seams. A watertight result depends on surface preparation, welding conditions, seam checks and sound flashing at terminations. TPO is commonly used on commercial flat and low-slope roofs and is often white or light-colored.

Benefits of TPO Roofing Systems

TPO Roofing - Lansing, MI 2

TPO has real advantages, though results depend on the building and the installation:

  • Reflectivity: light-colored membranes reflect sunlight, which can reduce heat gain. Actual cooling savings vary with insulation, equipment and use.
  • Heat-welded seams: welded seams can form a continuous barrier when properly made and inspected.
  • Flexibility: the membrane accommodates movement from Michigan’s temperature swings.
  • Common repair methods: many damaged areas can be repaired with compatible TPO materials.

Service life depends on membrane thickness, installation quality, exposure and maintenance, so treat any quoted lifespan as project-specific and ask for the basis. Recyclability depends on local programs and material condition, not on the membrane alone.

TPO Roofing Services

A TPO project is more than the membrane. It includes assessment of the existing roof, preparation, installation, seam and flashing work, and closeout. The sections below cover the main service stages and what to confirm at each.

TPO Roof Installation

Installation begins with a roof assessment, then moves through removal or overlay, insulation and substrate preparation, membrane attachment, seam welding and flashing. A written scope should name the membrane thickness and manufacturer, the attachment method and the seam testing or inspection steps. Drainage should be addressed in the scope, since TPO does not correct ponding. For a roof that remains occupied during the work, also define staging, rooftop-equipment protection, access to entrances and how open areas will be secured against rain at the end of each work period.

TPO Roof Repairs

Punctures, open seams and damaged flashing can often be repaired with compatible TPO material. Repair quality depends on clean surfaces and correct welding or adhesive methods, and an aged or contaminated membrane may not bond the way new material does. Ask the contractor to describe the repair method and the material before work begins. Repairs should distinguish surface punctures and split seams from wet insulation or damaged roof decking, which require a different scope.

TPO Maintenance and Inspection

Regular inspection helps catch seam, flashing and drainage issues early. A useful routine includes drain and debris checks, a review of seams, flashing and penetrations, and photo records, with a visit after severe weather. Retain dated observations, photos and repair records. If a manufacturer warranty applies, follow its specific inspection and maintenance conditions. See our repairs and maintenance page for service details.

Is TPO Right for Your Building?

TPO suits many flat and low-slope commercial roofs, but not every roof. Use this matrix to check suitability and to confirm that a proposal addresses each factor.

Factor What to assess Why it matters for TPO What the contractor should confirm
Substrate condition Deck type, existing layers, wet insulation and surface contamination TPO needs a sound, dry base; trapped moisture can undermine any new membrane Moisture findings, tear-off or overlay choice and a deck and insulation allowance
Drainage Slope, drains, scuppers and ponding history TPO does not correct standing water, and ponding can stress seams Whether tapered insulation or drain changes are included, and who is responsible
Attachment Mechanically fastened or fully adhered; ballast only where the specified manufacturer-approved system and structural capacity permit The attachment layout and tested assembly affect wind-uplift performance, deck requirements, disruption and future repair access The method, the manufacturer’s requirements and the reason it suits the roof
Insulation Existing insulation type, thickness and condition Insulation affects condensation risk, fastener hold and energy performance Insulation specification and the basis for any energy claim
Rooftop activity Foot traffic, equipment service, exhaust and chemicals Heavy traffic or contaminants can affect membrane and seams Walkway protection and whether TPO suits the exposure
Detailing Penetrations, curbs, parapets, edges and drains Seams, curbs, edges and penetrations are critical leak investigation areas Detail approach for each condition, following the manufacturer’s flashing requirements
Service access Roof access, future equipment changes and inspection routes Planned access supports inspections and repairs without damaging the membrane Access plan and the records delivered at closeout

For wider choices across the existing roof, the commercial roof replacement service explains how replacing an unsuitable assembly differs from maintaining a repairable roof.

Written Scope and Closeout for a Lansing TPO Roof

Before approving the work, ask for the exact membrane product and thickness, insulation and cover-board specification, attachment pattern, roof-edge details, the treatment of drains and penetrations, and the method for handling unexpected wet insulation or deteriorated decking. A recover is only appropriate when existing layers, moisture conditions, structure, applicable code and the selected manufacturer assembly permit it. A visual review alone may leave concealed conditions unknown; the proposal should explain any investigation limits.

At completion, compare the finished details with the agreed scope, review the status of identified repairs and request available material information, applicable warranty documents and the maintenance guidance for the assembly. Where inspections or tests are part of the contract, identify their results and any outstanding corrections. Written closeout matters when later work introduces new rooftop equipment or when a leak needs to be traced to a particular detail.

Trusted TPO Roofing Experts

Choose a contractor on the quality of the written scope, not on general claims. The proposal should name the system, explain the choices and list what is excluded. For a Lansing building, JM Roofing Solutions can be reached at (833) 466-5325 to discuss TPO roofing.

FAQ

How long does a TPO roof last?
It depends on membrane thickness, installation quality, exposure and maintenance. Ask for the basis of any lifespan estimate rather than relying on a fixed number.

Can TPO roofing be repaired if damaged?
Often, yes. Punctures and open seams can usually be repaired with compatible TPO material, but wet insulation or widespread damage may require a larger scope.

Is TPO roofing energy-efficient?
Reflective membranes can reduce heat gain, but results vary with insulation, equipment and building use. Ask what any savings estimate is based on.

How often should a TPO roof be inspected?
Inspect on a schedule appropriate to the roof, after significant weather events and when leaks are reported. Check any written warranty terms for specific obligations.